If you lack infrastructure for an elevator and are looking for a solution for a conventional lift, the MULTI LIFT S is the ideal choice for you. Upgrade your life with a reliable and efficient solution!
The MULTI LIFT S conventional elevator is designed to serve very narrow shafts, with a speed of 0.52m/s, and is certified according to the EN 81-20 elevator standard. It provides a solution in challenging situations such as stairwells, where the support of the guide is every 3.2 meters, i.e., on the floor slabs.
Trust the technology and reliability of MULTI LIFT S for the best upgrade of your space.
The MULTI LIFT S hydraulic elevator is the ideal solution for very narrow shafts, with maximum cabin dimensions up to 1.1×1.4m, and for locations where support is possible every 3.2m. It is ideal for limited spaces and areas requiring support on the floor slabs, such as narrow stairwells in old multi-story buildings or in buildings where an elevator is added by creating holes in the floors.
The lifting guide of the MULTI LIFT S is a metal column with T-guides of suitable cross-section to carry horizontal loads, supported every 3.2m for stability and safety.
The MULTI LIFT S meets all requirements of the EN 81-20 and EN 81-21 standards, providing reliable operation in shafts with low exits and limited last-floor heights, covering the most demanding installation conditions.
AVIEK provides a complete service package, from solution configuration to the licensing process, construction work, and delivery “turnkey”. Each MULTI LIFT S elevator is certified per unit by an independent certification body, ensuring quality and reliability.
Material: Galvanized sheet metal with electrostatic paint, stainless steel finishes
Coating: Electrostatic painting
Doors: Automatic BUS with certification 81-20
Glass: Triplex 5+5 transparent
Interior Decor: Stainless steel ceiling, skirting & mirrors
Flooring: PVC in wood pattern or tile
Control Panel: Stainless steel, with buttons and hidden lighting
Τηλέφωνο: Τηλεφωνική συσκευή έκτακτης ανάγκης
Χειρολαβή: Ανοξείδωτη κουπαστή στη πλευρά/στις πλευρές του τζαμιού
CompactMULTI LIFT mechanism with direct wall brackets
Hydraulic unit: Panel, pre-wired with slats
Chamber: Dimensions up to 1.1 x 1.4 m with emergency telephone
Chamber doors
Elevator floor doors: Dimensions 0.8 x 2 m
Supporting Beam for Floor Doors
Hydraulic Cabinet
Emergency Telephone
Lifting capacity: Up to 600 kg
Dimensions: Up to 1.1 x 1.4 m
Route: Up to 12 m
Number of tensions: up to 5
Cabin openings: 1 or 2
Bottom depth: 300 mm
Last floor height: 2720 mm
Speed: Double speed up to 0.52 m/s
Operation: Automatic
Current: 35 A – Cable 5 X 10 mm (400V)
Machine Room: Not required
Ballroom dimensions: 90 X 45 X 175 (Width X Depth X Height)
Harmonized with: Elevator Directive 2014/33/EU
For more information, download the product’s technical brochure from Technical Data.
It has a certification dossier and is certified per unit.
It provides a solution to very narrow wells.
It does not require a manhole infrastructure to support it, as it can be supported on the building slabs every 3.2 m without requiring a structural adequacy check.
It does not require a deep bottom and upper end, it meets the requirements of EN 81-21 for low endings.
CompactMULTI LIFT mechanism with direct wall brackets
Hydraulic unit: Panel, pre-wired with slats
Chamber: Dimensions up to 1.1 x 1.4 m with emergency telephone
Chamber doors
Elevator floor doors: Dimensions 0.8 x 2 m
Supporting Beam for Floor Doors
Hydraulic Cabinet
Emergency Telephone
Lifting capacity: Up to 600 kg
Dimensions: Up to 1.1 x 1.4 m
Route: Up to 12 m
Number of tensions: up to 5
Cabin openings: 1 or 2
Bottom depth: 300 mm
Last floor height: 2720 mm
Speed: Double speed up to 0.52 m/s
Operation: Automatic
Current: 35 A – Cable 5 X 10 mm (400V)
Machine Room: Not required
Ballroom dimensions: 90 X 45 X 175 (Width X Depth X Height)
Harmonized with: Elevator Directive 2014/33/EU
For more information, download the product’s technical brochure from Technical Data.
It has a certification dossier and is certified per unit.
It provides a solution to very narrow wells.
It does not require a manhole infrastructure to support it, as it can be supported on the building slabs every 3.2 m without requiring a structural adequacy check.
It does not require a deep bottom and upper end, it meets the requirements of EN 81-21 for low endings.
0,15m/s
